Lowbuck Box and Pan Brake

BOX AND PAN BRAKE

This press brake is good for bending straight bends up to 90 degrees. The bends have a nice 1/8 inch radius to eliminate vibration cracks. You can make a box or pan about 12 inches deep such as a fuel cell box or battery box. This machine will make long straight bends very well with some practice. The finished bend could require some hammer and dolly work for a perfectly smooth finished product. I’ve also bent 1/8 inch plate,1 inch wide for making small brackets, with your strong “C“ throat 18 Gauge Sheet Metal should be no problem.

back to Metal Machine Index page

To Place An ORDER Call (800) 735-7844